Functional Plastic Auxiliary Machine / Screw Feeding Machine For
Screw feeding machine for powder material
Feeder plastic processing machinery ancillary equipment required
can be powdered or granulated plastic materials transported to the
hopper, adjust the mixer equipment; contact material is made of
stainless steel. Materials during transport is completely free from
contamination, do not bring any foreign matter. Make the production
process to achieve fully enclosed automated. Easy to install, and
can be moved, eliminating the trouble of artificial feeding, is
feeding work has become more secure, more time and more effort. May
be timing, positioning automatic feeding. Conveying capacity,
High speed mixer
SRL-Z series mixing unit is applicable to a variety of resins such
as polyethylene, polypropylene, polyvinyl chloride and other
ingredients, mixing, coloring, drying, as well as ABS,
polycarbonate and other engineering plastics drying before molding,
devolatilization and other process can also be used a mixture of
SRL-Z series mixing unit combines heat mixing with cold mix process
together, complete automatic hot mix material mixed into the cold
to cool, remove residual gas, and prevent caking.
- four upright design, small size, easy to move.
- Equipped with cycloid motor noise at the end, durable.
- Fast complete mixing, low energy consumption, high efficiency.
- Pail cover and bottom parts are formed, precisely, more durable.
- Timer can be selected between 0 to 30 minutes mixing time.
- stainless steel blades, scientific structure, at work to mix raw
materials and minimize load, saving time
Auto feeding machine for pellet material
1, automatic computer operating procedures;
2, shut warning;
3, the use of high-speed rectifier motor, small size, strong
suction, suitable for the new conveyor;
4, stainless steel hopper;
5, the host and the barrel split design, safe and easy;
6, independent filtration device to facilitate the removal of dust.
High-efficiency drying greatly improve the quality of the law
1. The heat is distributing equably. The thermal efficiency of the
high heat exchange is very high, which greatly shorten the drying
2. The dried law materials have high temperature so as to drop
directly, which can shorten the melting time and increase the
3. The intensity of the dried products are obviously increased
after cleaning, which avoids the finished products shrinking.
Therefore, the law materials can be 100%passed
Precise remote control &safe operation
1. Use the highly precise temperature controller in order to make
the error range of the temperature regulation less than± 3.
2. Equip superheating protective device in order to accidents of
the machinery failure caused by superheating during machine
Precise manufacture &energy-saving expert
1. The canister and electroheat canister made of high-quality law
materials are processed through the high technics. The surfaces
inside and outside are glazed without dust and easy to clean. They
have excellent heat preservation capability so that they can
efficiently save electric power and energy.
2. The structure design is reasonable. It is simple and quick to
exchange the law materials, and there are various capacities of
machine types. It is pertinent to select and use efficiently and
reasonable so as to increase the work efficiency.
1, the whole machine adopts high-strength steel structure, durable;
2, particle chamber made of thick plate, low noise;
3, the motor is equipped with overload protection and safety
switches, and ensure safety;
4, reasonable structure, easy to operate;
5, the knife blade is removable embedding can be reused many times
more wear, and may differ depending on the product moving and
stationary blade pitch adjustment, moving and stationary knife as
scissors design, power, crushing effect.
1) Strong structure, easy to operate, low electricity consumption
2) Uses high quality steel material especially for making knives of
the crushers, the machine stands long use under severe and
continuous service conditions.
3) The blades can be grinded for many times and can be used
4) Blades base is made of T10 high quality steel, hard to be broken
and damaged; Blades base structure is stable and durable
5) With flat type, claw type and cross type blade and screen with
different hole size for chose to suit various demand.
6) With double reduce noise layer design to reduce noise output.
7) Has protection system with the power supply to ensure the
8) Easy to clean and maintain, the hopper, crusher room, blades and
screen can be removed and mounted easily.
1 large and small forms can be packaged for non-contact manner
2. Printing batch number, logo, product name, expiry date, number,
etc.; using some part of the package
3 identified invisible ink, invisible ink that only UV light
irradiation, in order to be read;
4 Use a variety of anti-counterfeiting ink; printing barcode
5 automatic sprinkler nozzle cleaning function ensures even in
frequent stop start of the production line, but also managed to
maintain smooth without blocking state
6 high-speed printing to meet the high-speed production line
7 non-contact printing method guarantees that even on uneven
surfaces and circular prints
The machine can be solid wood doors, plywood, particle board,
cement board, fiberboard, and integrated panels, frames, and other
kinds of sheet metal for strength and thickness sanding, fine
sanding. The machine consists of frame, feeding device, lifting
devices, electrical devices and automatic control device
components. The machine has two fixed roll a thick sanding pad,
sanding pad can work alone, more detailed processing of the plate
surface, more efficient
Mold temperature controller
By Japan OMRON Omron digital temperature control table, intuitive
display, easy to operate
European and American style box with streamlined design, the whole
without screw fasteners, maintenance, repair convenient
Segmented using fully digital PID temperature control system in any
operating state can maintain a steady mold temperature, temperature
control accuracy of ± 0.5 ℃
Imported by Taiwan high efficiency heat pump, can be applied to
small diameter precision molds and mold temperature control loop
needs and achieve precise temperature control and high efficiency
heat exchanger, flow, low noise, stable quality
Configuring Power reverse protection, pump overload protection,
over temperature protection, low liquid level protection and many
other safety devices, when a failure occurs, the machine can
automatically detect anomalies, and a light show abnormal condition
Heating pipes are made of SUS316 stainless steel.
Flow distributor made of SUS304 stainless steel processing, surface
polished, beautiful and generous appearance
CTM standard heating temperature up to 200 ℃, CTM-H high
temperature up to 300 ℃ temperature
Air cooling chiller
Mold cooling applied to reduce molding cycle time, can also be used
to cool the device to ensure that the device be maintained at
normal temperature, the required cooling or other industrial areas.